SPECIFICATIONS

Hunting Gun Bore Cleaner Rope .22 Cal.223 Cal.38 Cal& 5.56mm 7.62mm 12GA Rifle Cleaning Brush Kit Tool Rifle Barrel Calibre Rope

--- Features ---

【WELL-DESIGNED】1. Brass weight slips easily through barrel. 2. First floss area relieves foreign particles prior to the scrubbing action of the brush. 3. Bore brush embedded in the cord loosens hard deposits. 4. Main floss area with 160 times more surface area than a brush like no other product.

【SOLVENT COMPATIABLE】 The nylon bore rope absorbs gun brushing solvent well and there is no exposed metal to damage sensitive rifling or crown.

【LIGHTWEIGHT and COMPACT】 You can roll a up in your pocket in the field and then run it through a couple of times to relieve dirty quickly. It is great application for the military and recreational shooting.

【WASHABLE AND REUSEABLE】Bore cleaner can be washed which has no exposed metal to damage the rifling or crown of your barrel. It's great for a quick cleaning at the range, or any time you don't want to spend too much time doing a full cleaning and provides hundreds of times use.

--- Specifications ---

G01: 12GA Gauge
G02: .22 Cal .223 Cal & 5.56mm
G03: .38 Cal .357 Cal .380 Cal & 9mm
G04: .30 Cal .308 30-06 .300 .303 & 7.62mm
G05: .17 Cal .177 Cal .17HMR .17WMR & 4.5mm
G06: .416 Cal .44 45-70 .458 .460 Cal
G07: 20 GA Gauge
G08: .270 Cal .280 .284 & 7mm
G09:.44 Cal .45 Cal
G10: .243 Cal & 6mm
G11: .35 Cal .350 .357 .358 .375 Cal
G12: 410 GA Gauge
G13: .32 Cal & 8mm
G14: .338 Cal .340
G15: 16 GA Gauge
G16: .25 Cal .264 & 6.5mm
G17: .40 Cal .41 Cal

---Package includes---

1* Hunting Gun Cleaner Rope

How to Use a Bore?

1. Apply a few drops of bore to the front of the bore.

2. Drop the brass weight at the end of the Bore's black pull cord through the breach at the rear of the barrel and then begin to feed the pull cord down the length of the barrel until the brass
weight comes out the end.

3. Grasp the weight and pull it slightly until you can grasp the pull cord as well.

4. Wrap the pull cord around your dominant hand and then continue pulling so that the Bore braided nylon floss sweeps through the entire barrel and pull out completely from the end.

5. Repeat the process as needed and then apply lubricant to the end of cord and pull it through the bore one last time to oil and polish.

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!

Please allow 1-2cm measuring deviation due to manual measurement.